Operation CHARM: Car repair manuals for everyone.
Home >> Isuzu >> 2002 >> Rodeo S 2WD V6-3.2L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Sensors and Switches - Computers and Control Systems >> Accelerator Pedal Position Sensor >> Adjustments
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Accelerator Pedal Position Sensor: Adjustments

Accelerator Position Sensor Adjustment
AP sensor is controlled three multiple control system, and adjust the idle position and WOT position are between A and B for AP sensor 1, AP sensor 2, and AP sensor 3. Refer to "How to adjust for AP sensor".

REMOVAL PROCEDURE
1. Disconnect the negative battery cable.
2. Disconnect the electrical harness from the AP sensor.

How to Adjust For AP Sensor
1. Connect the Tech 2 to DLC on vehicle.
2. Ignition "ON", engine "OFF".




3. Display the APS date list. Check the following item for AP position (%).




4. If the problem was found, adjust as necessary.
pro multis · About Operation CHARM