Air Duct: Service and Repair

Rear Heater Duct, Defroster Nozzle, Ventilation Duct And Associated Parts:

Removal

1. Disconnect the battery ground cable.

2. Remove instrument panel assembly.
- Refer to Instrument Panel Assembly in Body and Accessories.

3. Remove center ventilation upper duct.
4. Remove side ventilation duct.
5. Remove center ventilation lower duct.
6. Remove driver lap duct.
7. Remove center console.

8. Remove rear heater duct.
- Refer to Consoles in Body and Accessories.

9. Remove cross beam assembly.
- Refer to Cross Beam Assembly in Body and Accessories.

10. Remove side defroster nozzle.
11. Remove center defroster nozzle.

Installation

To install, follow the removal steps in the reverse order, noting the following point:
1. Connect each duct and nozzle securely leaving no clearance between them and making no improper matching.