Blower Assembly

Blower Assembly And Associated Parts:

Blower Assembly

Removal

1. Disconnect the battery ground cable.
2. Discharge and recover refrigerant (with air conditioning).
- Refer to Refrigerant Recovery.

3. Remove instrument panel assembly.
- Refer to Instrument Panel Assembly in Body and Accessories.

4. Disconnect resistor connector.
5. Remove duct.

6. Remove evaporator assembly (A/C only).
- Refer to Evaporator Assembly.

7. Remove dash side trim panel (RH).
8. Disconnect blower motor connector.
9. Remove blower assembly.

Installation

To install, follow the removal steps in the reverse order, noting the
following point:

1. Adjust the control lever assembly cables.
Refer to Control Lever Assembly.