Rear Door Lock Assembly

Rear Door Lock Assembly And Associated Parts:

Rear Door Lock Assembly

Removal

1. Disconnect the battery ground cable.
2. Remove the door trim panel.
3. Remove the waterproof sheet.
Refer to the Window Regulator removal procedure in Body Structure.




4. Disconnect the locking links (arrow marks positions) and remove the fixing screws to remove the door lock assembly.

Installation

To install, follow the removal steps in the reverse order, noting the following points.

1. Apply chassis grease to the lock assembly and striker moving surface.
2. Tighten the door lock assembly fixing screws to the specified torque.

Torque: 7 N.m (61 lb in)

3. Check that the door lock operates smoothly.