Cabin Temperature Sensor / Switch: Service and Repair

Inside Air Temperature Sensor Assembly Replacement

Removal Procedure

IMPORTANT: Recline the driver seat rearward to access the left center trim pillar.

1. Remove the upper portion of the left center trim pillar.
2. Disconnect the electrical connector.
3. Remove the retaining clips from the B pillar.




4. Remove the inside air temperature sensor assembly (1) from the B pillar.

Installation Procedure
1. Connect the electrical connector to the inside air temperature sensor assembly (1).
2. Install the inside air temperature sensor assembly (1) to the B pillar.
3. Install the retaining clips to the B pillar.




4. Install the upper portion of the left center trim pillar.