Operation CHARM: Car repair manuals for everyone.
Home >> Isuzu >> 2003 >> Ascender 2WD V8-5.3L >> Repair and Diagnosis >> Lighting and Horns >> Brake Light Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Brake Light Switch: Service and Repair

Stop Lamp Switch Replacement




Removal Procedure
1. Remove the pushrod retainer (3) from the brake pedal pin (4).
2. Remove the stop lamp switch (1) and the pushrod (2) from the brake pedal pin (4).
3. Disconnect the stoplamp switch (1) electrical connector.
4. Remove the stoplamp switch from the vehicle.




Installation Procedure
1. Install the electrical connector to the stop lamp switch (1).
2. Position the stop lamp switch (1) on the pushrod (2) and install the assembly on the brake pedal pin.
3. Install the pushrod retainer (3) to the brake pedal pin (4). The retainer will snap into place.
pro multis · About Operation CHARM