Fog/Driving Lamp: Service and Repair

Fog Lamp Replacement - Front

Removal Procedure
1. Remove the fog lamp bulb and socket.
2. Remove the 3 nuts that retain the fog lamp to the fascia (2).




3. Remove the fog lamp from the fascia.

Installation Procedure
1. Install the fog lamp to the fascia (2).

NOTE: Refer to Fastener Notice in Cautions and Notices.

2. Install the 3 fog lamp retaining nuts.

Tighten:
Tighten the nuts to 10.0 Nm (88 lb in).

3. Install the fog lamp bulb and socket.




4. Aim the fog lamp(s). Refer to Fog Lamp Aiming Procedure.