Lock Cylinder Replacement

LOCK CYLINDER REPLACEMENT - LIFT GATE

The content of this article/image reflects the changes identified in TSB-SB06-11-S003


REMOVAL PROCEDURE




1. Remove the rear wiper motor.
2. Remove the lock rod from the lock cylinder.




3. Remove the C clip from the groove in the lock cylinder.
4. Remove the lock cylinder from the liftgate.

INSTALLATION PROCEDURE




1. Install the lock cylinder to the liftgate.
2. Install the C clip to the groove in the lock cylinder.




3. Install the lock rod to the lock cylinder.
4. Install the trim panel.