Engine Controls - DTC P2135 Service Manual Revision

TSB SB04-01-S001

Revised DTC P2135 (Service Manual Revision)

Issue Date: March, 2004

Affected Vehicles

2003-2004 Isuzu Ascender (US).

Service Information





Step four (4) of DTC P2135 in the Engine Controls and 5.3L sub-section of the Service Manual has been revised. Step four (4) now includes the use of jumper wires. Use the chart shown when performing this operation.

NOTE:
Information released on paper and electronic format prior to bulletin release cannot be updated. For the most current and up to date information refer to IsuzuONE.com.

This Service Bulletin is intended for use by professional, qualified technicians. Attempting repairs or service without the appropriate training, tools, and equipment could cause injury to you or others and damage to your vehicle that may cause it not to operate properly.





Disclaimer