Low and Reverse Clutch Piston Installation

Low and Reverse Clutch Piston Installation

Tools Required
^ J23327-1 Clutch Spring Compressor
^ J34627 Snap Ring Remover and Installer
^ J36850 Assembly Lubricant





1. Install the transmission (low and reverse clutch outer, center, inner) seals (696) on the low and reverse clutch piston (695).
2. Lubricate the seals with assembly lubricant J36850 or an equivalent.





3. Install the low and reverse clutch piston (695) into the case. The notch in the piston must be aligned with the parking brake pawl window, in the case.





4. Install the low and reverse clutch spring assembly (694).
4.1. Using the J23327-1, compress the low and reverse clutch spring assembly (694).
4.2. Using J36850 install the low and reverse clutch retainer ring (693).