Locking Differential Clutch Disc Assembly - Assemble

Locking Differential Clutch Disc Assembly - Assemble
1. Apply axle lubricant, P/N 12378261 (Canadian P/N 10953455) or equivalent meeting Specification 9986115, to the surface of each disc.
2. Assemble the right side or bell-end side clutch disc assembly as follows:
2.1. Install the two-sided carbon eared disc (2) to the side gear(1).
2.2. Install the 1st splined disc (4).
2.3. Install the 2nd splined disc (5).
2.4. Install the one-sided carbon eared disc (6).
2.5. Install the guide clips (3) to the clutch discs (2, 4-6).
Apply chassis grease, P/N 12377985 (Canadian P/N 88901242) or equivalent, to the guide clips in order to hold the clips in place on the disc ears.