Headlamp Bulb: Service and Repair

Headlight Bulb

Removal

1. Disconnect the battery ground cable.
2. Remove the headlight bulb.
- Disconnect the connector (2).
- Remove the socket (1) by turning it counterclockwise.






CAUTION: Do not touch the headlight bulb with your fingers. The oil on your fingers will leave a residue which will shorten the life of the halogen bulb. In order to prevent this problem, clean the bulb lens before installing the headlight bulb.

Installation

To install, follow the removal steps in the reverse order, noting the following point:
1. Make sure to set the retaining ring and the bulb cover. If the set is incomplete, there is a possibility that the water comes in the light.