Rear Seat Belt

Rear Seat Belt And Associated Parts:

Removal
1. Disconnect the battery ground cable.
2. Remove the tailgate weather strip.
3. Remove the rear end floor trim cover.
4. Remove the rear sill plate.
5. Remove the anchor cover and the lower anchor bolt.
6. Remove the lower quarter trim cover.
- Refer to Interior Trim Panels in Exterior/Interior Trim.

7. Remove the seat belt upper anchor bolt (3).
- Remove the shoulder anchor cap (4).





8. Remove the upper quarter pillar trim cover (1).
- Remove the screw cover and screw.
- Pry the trim cover with the clip positions (2) from the body panel.

9. Remove the retractor.
- Remove the screw and bolt.

10. Remove the rear seat belt assembly.
11. Remove the adjustable shoulder anchor assembly.
- Remove the two fixing bolts.

Installation
To install, follow the removal steps in the reverse order, noting the following point.
1. Tighten the adjustable shoulder anchor assembly fixing bolts to the specified torque.

Torque: 39 N.m (29 lb ft)

2. Tighten the seat belt anchor bolts (Upper & Lower) and the retractor fixing bolts to the specified torque.

Torque: 39 N.m (29 lb ft)