Rear Washer Motor

Rear Washer Motor

Removal

1. Disconnect the battery ground cable.

2. Remove the fender panel (right side).
- Refer to Front Fender Panel in Body Structure section.

3. Disconnect the windshield washer motor connector and the rear washer motor connector.

4. Disconnect the windshield washer hose connector and the rear washer hose connector.

5. Remove the filler neck (3).
- Remove the bolt.

6. Remove the washer tank (2).
- Remove the three nuts.

7. Remove the rear washer motor (1).




- Pull out the motor from the washer tank.

Installation

To install, follow the removal steps in the reverse order.