Rear Center Seat Belt/Buckle Assembly

Rear Center Seat Belt/Buckle Assembly And Associated Parts:

Removal

1. Remove the seat lock cover (SWB).
2. Remove the rear cushion frame assembly (LWB).
- Refer to Rear Seat Assembly in Seats section.

3. Remove the rear seat lock assembly and rear seat belt buckle assembly.

Installation

To install, follow the removal steps in the reverse order, noting the following point:
1. Tighten the rear seat lock assembly and rear seat belt buckle assembly fixing bolts to the specified torque.

Torque: 39 N.m (29 lb ft)

NOTE: Removal and installation procedure of rear center seat belt assembly same as rear seat belt buckle assembly procedures.