RH Exhaust Manifold

Exhaust Manifold RH
Removal
1. Disconnect battery ground cable.
2. Remove torsion bar.





3. Remove exhaust front pipe three stud nuts and two nuts then disconnect exhaust front pipe.





4. Remove exhaust manifold eight fixing nuts then the exhaust manifold.

Installation





1. Install exhaust manifold and tighten nuts to the specified torque.
Torque: 57 Nm (42 ft. lbs.)





2. Install exhaust front pipe and tighten three stud nuts and two bolts to the specified torque.
Torque:
Stud nuts: 67 Nm (49 ft. lbs.)
Nuts: 43 Nm (32 ft. lbs.)
3. Install the torsion bar and readjust the vehicle height.