Evaporative Emission Control Canister: Service and Repair
REMOVAL PROCEDURE1. Disconnect the negative battery cable.
2. Disconnect the two hoses from the EVAP canister.
3. Disconnect the fuel vapor connector and the purge hose from the EVAP canister vent solenoid.
4. Remove the two retaining bolts the EVAP canister to the mounting bracket on the cross member.
5. Remove the retaining bolt on the mounting bracket the slide the canister out of mounting bracket.
INSTALLATION PROCEDURE
1. Slide the canister into mounting bracket and install the mounting bracket bolt.
2. Install the retaining bolts the EVAP canister to the mounting bracket on the cross member.
3. Connect the fuel vapor connector to the EVAP canister vent solenoid.
4. Connect the two hoses to the EVAP canister.
5. Disconnect the negative battery cable.