Manufacturer's Scan Tool - Tech 2

Tech 2 Scan Tool

Getting Started

- Before operating the Isuzu PCMCIA card with the Tech 2, the following steps must be performed:

1. The Isuzu 2003MY System PCMCIA card inserts into the Tech 2.
2. Connect the SAE 16/19 adapter to the DLC cable.
3. Connect the DLC cable to the Tech 2.
4. Mark sure the vehicle ignition is off.




5. Connect the Tech 2 SAE 16/19 adapter to the vehicle DLC.
6. The vehicle ignition turns on.




7. Verify the Tech 2 power up display.

NOTE: The RS232 loop back connector is only to use for diagnosis of Tech 2 and refer to user guide of the Tech 2.

Operating Procedure







The power up screen is displayed when you power up the tester with the Isuzu systems PCMCIA card. Follow the operating procedure given.

Menu




- The given table shows which functions are used for the available equipment versions.

DTC Modes







- Read DTC info by Priority
- Clear Info




Data Display