Circuit Operation

Circuit Operation
The shift on the fly system switches between 2 wheel drive (2WD) and 4 wheel drive (4WD) electrically by the driver pressing the 4WD switch (rotary type) on instrument panel.

1. Shifting the transfer front output gear (Connecting to, and disconnecting from, front propeller shaft by motor actuator).
2. Retrial of shifting the transfer front output gear.
3. Connecting front wheels to, and disconnecting them from, the front axles by axle motor actuator.
4. Indicator on instrument panel.
5. 4WD out signal to other Electronic Hydraulic Control Units.