Trim Plate Replacement - Rear Floor - Front

Trim Plate Replacement - Rear Floor - Front

Removal Procedure

1. Lower the midgate to the cargo position.
2. Raise the hinged filler panel on the back of the midgate.




3. Remove the pushpins securing the rear floor front trim panel end covers by unscrewing the retainer pin.
4. Remove the rear floor front trim panel end covers.
5. Remove 2 push pin fasteners by lifting up on each end of the rear floor front trim panel.




6. Grasp the front edge of the rear floor front trim panel and pull straight up to release the retaining clips along the front edge.
7. Remove the rear floor front trim panel by pulling straight up to release the retaining clips along the rear edge.
8. Remove the rear floor front trim panel from the vehicle

Installation Procedure




1. Ensure that the retaining clips are securely installed on the back side of the rear floor front trim panel.
2. Lift up on the front edge of the cargo mat and slide the rear floor trim panel into position.
3. Position the rear floor front trim panel so that the fasteners align with their respective holes.
4. Install the rear floor front trim panel by pressing the retaining clips and fasteners into the sheet metal openings.




5. Install the rear floor front trim panel end covers by pressing them in place.
6. Install the pushpin in each rear floor front trim panel end cover by pushing the pin into the hole and screwing in the retainer pin.