Low Traction Indicator Always on
Low Traction Indicator Always OnCircuit Description
The ignition 1 voltage circuit supplies 12 volts to the traction control switch. The EBCM illuminates the low traction indicator by applying ground to the traction control active signal circuit.
Diagnostic Aids
Thoroughly inspect connections or circuitry that may cause an intermittent malfunction. Refer to Testing for Electrical Intermittents, Testing for Intermittent and Poor Connections, Wiring Repairs and Connector Repairs.
Test Description
The number below refers to the step number on the diagnostic table.
4. This step tests for proper operation of the low traction indicator circuitry.
Low Traction Indicator Always On
Test 1 - 3:
Test 4 - 8:
