Oil Level Indicator and Tube Installation

Oil Level indicator and Tube Installation





1. Inspect the O-ring seal for cuts or damage. If the oil level indicator tube O-ring seal is not cut or damaged, it may be used again.
2. Lubricate the O-ring seal with clean engine oil.
3. Install the O-ring seal onto the oil level indicator tube.
4. Install the oil level indicator tube into the engine block and rotate into proper position.

Notice: Refer to Fastener Notice in Service Precautions.

5. Install the tube bolt.
^ Tighten the oil level indicator tube bolt to 25 Nm (18 ft. lbs.).
6. Install the oil level indicator into the tube.