60000 MI or 96000 KM
LubricateBody and Frame
Lubricate all key lock cylinders, hood latch assembly, secondary latchs, pivots, spring anchors, release pawl, rear compartment hinges, outer liftgate handle pivot points, rear door detent link, roller mechanisms, liftgate handle pivot points, latch bolts, fuel door hinge, cargo door hinge, and folding seat hardware. More frequent lubrication may be required when exposed to a corrosive environment. Applying silicone grease on weatherstrips with a clean cloth will make them last longer, seal better and not stick or squeak. Perform at mileage interval or every 12 months, whichever comes first.
Reset
Oil Change Reminder Lamp
Perform at mileage interval or every 3 months, whichever comes first, following every oil and filter change.
Inspect
Wiper Blade
Replace, if necessary. Perform at mileage interval or every 12 months, whichever comes first.
Washer Fluid
Perform at mileage interval or every 6 months, whichever comes first.
Vehicle
Visually check for leaks or damage. A fluid loss in any vehicle could indicate a problem. Perform at mileage interval or every 3 months.
Steering and Suspension
Visually inspect front and rear suspension and steering system for damaged, loose, or missing parts or signs of wear. Inspect power steering lines and hoses for proper hook-up, binding, leaks, cracks, chafing, etc. Perform at mileage interval or every 12 months, whichever comes first.
Restraints and Safety Systems
Make sure the safety belt reminder light and all the belts, buckles, latch plates, retractors, and anchorages are working properly. Look for any other loose or damaged safety belt system parts. Replace all components that might keep the restraint system from working properly. Perform at mileage interval or every 12 months, whichever comes first.
Fluid - A/T
Add fluid as needed. Perform at mileage interval or every 6 months, whichever comes first.
Disc Brake System
Visually inspect brake lines and hoses for proper hook-up, binding, leaks, cracks, chafing, etc. Inspect pads for wear and rotors for surface condition. Inspect other parts, including calipers, parking brake, etc. Perform at mileage interval or every 6 months, whichever comes first.
Cooling System
Visually inspect hoses and replace if necessary. Inspect all pipes, fittings, and clamps and replace if necessary. Pressure test the system and cap. Clean the outside of the radiator and a/c condenser. Perform at mileage interval or every 12 months, whichver comes first.
Coolant
Perform at mileage interval or every 6 months, whichever comes first.
Air Filter Element
Replace, if necessary. Perform at mileage interval or every 12 months, whichever comes first.
Replace
Oil Filter, Engine
Perform at mileage interval or every 3 months, whichever comes first.
Engine Oil
Perform at mileage interval or every 3 months, whichever comes first.
Rotate
Tires
Check inflation pressures and wear. Perform rotation at mileage interval or every 6 months, whichever comes first. Perform wear inspection monthly.