Operation CHARM: Car repair manuals for everyone.
Home >> Isuzu >> 2006 >> Ascender 2WD L6-4.2L >> Repair and Diagnosis >> Body and Frame >> Seats >> Power Seat Switch >> Service and Repair >> Seat Switch Bezel Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Seat Switch Bezel Replacement



Seat Switch Bezel Replacement

Removal Procedure




1. Remove the 3 screws that retain the switch bezel to the seat.




2. Partially remove the switch bezel from the seat.
3. Remove the seat switches from the switch bezel by releasing the retaining tabs.
4. Remove the lumbar switch from the switch bezel by releasing the retaining tabs.
5. Remove the switch bezel from the seat.

Installation Procedure




1. Install the lumbar switch to the switch bezel, verifying that the retaining tabs are fully seated.
2. Install the seat switches to the switch bezel, verifying that the retaining tabs are fully seated.





Notice: Refer to Fastener Notice in Service Precautions.

3. Install the switch bezel to the seat with the 3 screws.

Tighten the front seat switch bezel screws to 3 N.m (26 lb in).
pro multis · About Operation CHARM