Operation CHARM: Car repair manuals for everyone.
Home >> Isuzu >> 2006 >> Ascender 2WD L6-4.2L >> Repair and Diagnosis >> Body and Frame >> Weatherstrip >> Trunk / Liftgate Weatherstrip >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Trunk / Liftgate Weatherstrip: Service and Repair



Weatherstrip Replacement - Liftgate

Removal Procedure




1. Open the liftgate.
2. Pull the liftgate weatherstrip from the liftgate opening pinch-weld flange.

Installation Procedure




1. Install the liftgate weatherstrip, starting at the top center of the liftgate opening position the liftgate weatherstrip to the pinch-weld flange and working down the right and left sides towards the bottom center, being careful not to stretch the liftgate weatherstrip while installing it.
2. Install the butt joint seam at the center of the bottom pinch-weld flange.
3. Use a rubber mallet to ensure full engagement of the liftgate weatherstrip to the pinch-weld flange.
4. Spooning of the liftgate weatherstrip may be required to complete the installation of the liftgate weatherstrip.
5. Close the liftgate.
pro multis · About Operation CHARM