Operation CHARM: Car repair manuals for everyone.
Home >> Isuzu >> 2006 >> Ascender 2WD L6-4.2L >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Knock Sensor >> Service and Repair >> Knock Sensor (KS) Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the logical successor to CHARM, I recommend you try it!

Link: lemon-manuals.la

Knock Sensor (KS) Replacement



KNOCK SENSOR (KS) REPLACEMENT

REMOVAL PROCEDURE
1. Raise the vehicle. Refer to Vehicle Lifting.




2. Remove the knock sensor harness connector (4).
3. Remove the knock sensor retaining bolt (3).
4. Remove the appropriate knock sensor (1 or 2).

INSTALLATION PROCEDURE




1. Install the knock sensor (1 or 2) and the bolt (3).

NOTE: Refer to Component Fastener Tightening Notice in Service Precautions.

Tighten the sensor to 25 N.m (18 lb ft).

2. Connect the knock sensor harness connector (4).
3. Lower the vehicle.
pro multis · About Operation CHARM