Operation CHARM: Car repair manuals for everyone.
Home >> Isuzu >> 2006 >> i-280 L4-2.8L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Variable Valve Timing Solenoid >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the logical successor to CHARM, I recommend you try it!

Link: lemon-manuals.la

Variable Valve Timing Solenoid: Service and Repair



CAMSHAFT POSITION (CMP) ACTUATOR SOLENOID VALVE REPLACEMENT

REMOVAL PROCEDURE




1. Disconnect the engine wiring harness electrical connector (1) from the camshaft position (CMP) actuator solenoid valve (6).




2. Remove the CMP actuator solenoid valve bolt (3).
3. Remove the CMP actuator solenoid valve (2) from the cylinder head.Discard the O-ring seal.
4. Clean debris from the hole (1).

INSTALLATION PROCEDURE




1. Install a new O-ring seal to the actuator solenoid valve (2).
2. Lightly lubricate the O-ring seal with clean engine oil.
3. Install the CMP actuator solenoid valve (2) into the cylinder head.
4. Install the camshaft position actuator solenoid valve bolt (3).

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the CMP actuator solenoid valve bolt to 10 N.m (89 lb in).




5. Connect the engine wiring harness electrical connector (1) to the CMP actuator solenoid valve (6).
pro multis · About Operation CHARM