Lubricant Replacement

Lubricant Replacement - Rear Drive Axle

Removal Procedure
1. Clean the area around the rear axle fill plug.
2. Remove the rear axle fill plug.
3. Remove the rear axle cover.
4. Drain the lubricant into a suitable container.

Installation Procedure





1. Install the rear axle cover.
2. Inspect the fluid level.
3. Fill the rear axle with axle lubricant. Use the proper fluid.
4. Install the rear axle fill plug.
^ Tighten the rear axle fill plug to 33 Nm (24 ft. lbs.).
5. Lower the vehicle.