Removal

Fuel Rail

Removal
1. Remove the charge air hose (between intercooler and inlet pipe).
- Disconnect the connector of the boost pressure sensor.







2. Disconnect the connector of fuel rail pressure sensor, and all the connectors.
3. Remove the fuel feed pipe with the hose.







4. Remove the EGR valve.
- Tape the EGR case holes shut to prevent the entry of foreign material.







5. Remove the oil level gauge and guide tube.
6. Remove the injection pipe clips and the injection pipes.







7. Remove the fuel pipe(1).
8. Remove the clip and the fuel leak off pipe(2).







9. Remove the fuel rail and the fuel rail bracket.
- Should not have the flow damper. Should always have the fuel rail.
- Take care not to damage the connector unit of the pressure sensor.