Front Fender: Service and Repair

Front Fender

Panel Drawing







1. Fender Front

Pre-Repair Activities Operation No
Load - Unload Vehicle to Ramp 100-02

Health and Safety
Suitable health and safety equipment should be used during the panel replacement operation.

Adjacent Panels
None

Times

MET
1. Front Fender Left 1.5 hours
2. Front Fender Right 1.4 hours

PANEL
1. Front Fender 0.5 hours

Mechanical, Electrical and Trim

Remove and install: Operation No
Bumper Fixing Front 76.22.73
Engine Lower Splash Shield 76.22.90
Fender Liner 76.10.90
Headlamp Mask Panel Fixings
Sill Outer Trim
Fender Front Trim
Side Repeater Lamp


01. The front fender is a bolt on panel.
Remove all trim items as listed within the MET. Undo securing bolts (8), and remove panel from vehicle.







02. On completion of the paint process, rebuild the front fender in the reverse order.
On completion of the repair operation, refit MET items and items removed in Pre-Repair Activities.