Fluid - A/T: Service and Repair

Drain

1. Raise and support the vehicle.

2. Place a suitable container under the transmission drain plug.





3. Remove the transmission drain plug.

NOTE: If an integral problem is suspected, drain the transmission fluid through a paper filter. A small amount of metal or friction particles may be found from normal wear. However, if excessive metal and friction particles are present, internal examination may be required.





4. Install the transmission drain plug.
Tighten to 45 Nm.

Refill
5. Lower the vehicle.





6. Remove the automatic transmission fluid charging pipe cap.

7. Fill the automatic transmission with 8 liters of automatic transmission fluid through the automatic transmission fluid charging pipe.

NOTE: Use automatic transmission fluid WSS-M2C922-A1 or equivalent meeting Jaguar specification.

8. Carry out a fluid level check and adjustment. Testing and Inspection