Multifunction Voice Activated Module

Multifunction Voice Activated Module (86.80.40)

Removal
1. Disconnect the battery ground cable.

CAUTION:
- Prior to removal of the module, it is necessary to upload module configuration information to the Jaguar approved diagnostic system. This information needs to be downloaded into the new module once installed.
- Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage may result.

2. Detach the luggage compartment side trim panel.
- Remove the luggage compartment side trim panel retaining clip.
- Detach the luggage compartment side trim panel.







3. Disconnect the electrical connectors.







4. Detach the module mounting bracket.







5. Remove the module mounting bracket.
- Disconnect the electrical connectors.







6. Detach the multifunction voice control module mounting bracket.







7. Remove the electrical connectors.







8. Remove the multifunction voice module.







Installation
1. To install, reverse the removal procedure.
- Tighten to 10 Nm.