Front Door Panel: Service and Repair

Front Door Trim Panel (76.34.01)

Removal

1. Remove the exterior mirror trim panel.
- Release the 3 clips.
- Disconnect the electrical connector.







2. Release the front door trim panel.
- Remove the bolt cover.
- Remove the 3 Torx bolts.
- Release the 16 clips.







3. Remove the front door trim panel.
- Release the front door interior handle cable.
- Disconnect the 2 electrical connectors.







4. NOTE: Do not disassemble further if the component is removed for access only.

Remove the front door latch remote control handle.
- Release from the 5 clips.







5. Remove the grab handle cover.
- Release from the 6 clips.







6. Remove the window control switch.
- Release from the 3 clips.
- Disconnect the electrical connector.







7. Remove the front seat control switch.
- Remove the 4 Torx screws.
- Disconnect the electrical connector.







Installation

1. Install the front seat control switch.
- Connect the electrical connector.
- Fit and tighten the Torx screws.

2. Install the window control switch.
- Connect the electrical connector.
- Secure in the clips.

3. Install the grab handle cover.
- Secure in the clips.

4. Install the front door latch remote control handle.
- Secure in the clips.

5. Install the front door trim panel.
- Attach the front door interior handle cable.
- Connect the electrical connectors.

6. Secure the front door trim panel.
- Secure in the clips.
- Tighten the Torx bolts to 10 Nm (7 lb.ft).
- Install the bolt cover.

7. Install the exterior mirror trim panel.
- Connect the electrical connector.
- Secure with the clips.