Steering Column Multifunction Switch LH
Steering Column Multifunction Switch LHRemoval
1. Remove the cover and disconnect the battery ground cable.
2. Make the SRS system safe.
3. Remove the instrument panel, lower trim panel.
4. Remove the steering column lower cowl.
^ Remove the 2 screws.
^ If installed, disconnect the steering column and foot pedal control switch electrical connector.
5. Remove the steering column upper cowl.
^ Remove the 3 screws.
6. Remove the steering column multifunction switch.
^ Disconnect the electrical connector.
^ Depress the 2 clips.
Installation
1. Install the steering column upper cowl.
^ Install the screws.
2. Install the steering column lower cowl.
^ If installed, connect the steering column and foot pedal switch electrical connector.
^ Secure in the clips.
^ Install the screws.
3. Install the instrument panel, lower trim panel.
4. Connect the battery ground cable and install the cover.
5. Connect WDS to the vehicle and configure a new module.
6. Install the multifunction switch.
^ Align the lugs and secure the clips.
^ Connect the electrical connector.