Squeaks
Squeaks
Apply KRYTOX sparingly to the target surface area using the integral nozzle of the plastic bottle. Only a few drops are required for most applications. This may be further spread to cover larger surface areas using a cloth, brush, or sponge to leave a very thin film of the fluid on the surface concerned. Care must be taken not to inadvertently spread the fluid where adhesives are intended for use.
KRYTOX fluid is available via Jaguar Parts Operations. It is an inert, safe, easy to use material, likened by many to liquid TEFLON, which may be used as a durable fix for squeaks associated with interior trim, weatherstrips and rubber seals and bushes.
Being inert, non volatile and compatible with most materials, KRYTOX may be used as a durable solution for squeaks on interior or exterior trim, regardless of location on the vehicle. Once applied, KRYTOX is not visible and may be used as an alternative to felt pads and tapes, which can be unsightly and difficult to apply.
Typical applications include:
- Leather Seats, Consoles and Trim: Eliminates creaking attributed to leather seats and trim.
- Plastic & Elastomeric Trim: KRYTOX lubricates and isolates contact surfaces, eliminating squeaks.
- Weather strip Lubrication: KRYTOX may be used on both flocked and unflocked seals and glass run channels to eliminate noise and glass judder.
- Sliding roofs: KRYTOX may prevent squeaks and sticking experienced with sliding roofs and their seals.
- Rubber Seals and Bushings: May be used to eliminate squeaking arising from rubber seals and bushings.
- Components: KRYTOX may be applied to provide smooth operation of handles, switches, air vents, controls, cables, etc.