Fuel Level Sender LH

Fuel Level Sender LH - 2.5L/3.0L

Removal

WARNING:
- Do not smoke or carry lighted tobacco or an open flame of any type when working on or near any fuel related components. Highly flammable vapors are always present and may ignite. Failure to follow these instructions may result in personal injury.
- Do not carry or operate cellular phones when working on or near any fuel related components. Highly flammable vapors are always present and may ignite. Failure to follow these instructions may result in personal injury.
- This procedure involves fuel handling. Be prepared for fuel spillage at all times and always observe fuel handling precautions. Failure to follow these instructions may result in personal injury.

NOTE: All vehicles.

1. Remove the transfer pump.

NOTE: Non federal market vehicles only.

2. Disconnect the fuel level sender electrical connector.







NOTE: Non federal market vehicles only.

3. Remove the fuel level sender.







NOTE:
- Federal market vehicles only.
- Note the position of the tie straps securing the harness to the fuel pipes.

4. Remove the tie straps.







NOTE: Federal market vehicles only.

5. Remove the fuel level sender and harness.







Installation

WARNING:
- Do not smoke or carry lighted tobacco or an open flame of any type when working on or near any fuel related components. Highly flammable vapors are always present and may ignite. Failure to follow these instructions may result in personal injury.
- Do not carry or operate cellular phones when working on or near any fuel related components. Highly flammable vapors are always present and may ignite. Failure to follow these instructions may result in personal injury.
- This procedure involves fuel handling. Be prepared for fuel spillage at all times and always observe fuel handling precautions. Failure to follow these instructions may result in personal injury.

1. To install, reverse the removal procedure.