Roof Opening Panel Motor

Roof Opening Panel Motor
This is a "Trustmark Authoring Standards (TAS) Repair Procedure"
- TAS style procedures can be identified by steps that have no accompanying step text and the magenta color of the electrical connectors and fasteners such as nuts, bolts, clamps or clips.
- TAS removal and installation procedures use a sequence of color illustrations to indicate the order to be followed when removing/disassembling or installing/assembling a component.
- Many of the TAS procedures will have the installation information within the removal steps.
- The TAS color illustrations use a variety of symbols to indicate important details of the procedures. It is important to understand these symbols in order to properly used the TAS procedures.
Refer to How to Use TAS Procedures and TAS Symbol Glossary at Vehicle | Description and Operation for additional information on these TAS procedures.
For additional information, refer to How to Use TAS Procedures How to Use TAS Procedures
For additional information, refer to TAS Symbol Glossary TAS Symbols Glossary
Removal

NOTE:
Removal steps in this procedure may contain installation details.

NOTE:
Some variation in the illustrations may occur, but the essential information is always correct.

NOTE:
The procedure must be carried out on both sides.
For additional information, refer to A-Pillar Trim Panel Pillar Trim

NOTE:
The procedure must be carried out on both sides.
For additional information, refer to Sun Visor Service and Repair

Torque to: 2 Nm

NOTE:
The procedure must be carried out on both sides.
For additional information, refer to C-Pillar Trim Panel C-Pillar Trim Panel

NOTE:
Some variation in the illustrations may occur, but the essential information is always correct.

NOTE:
Make sure that the component is installed to the position noted on removal.

NOTE:
Right-hand shown, left-hand similar.

NOTE:
The procedure must be carried out on both sides.

Torque to: 2 Nm

NOTE:
The procedure must be carried out on both sides.

Torque to: 6 Nm

NOTE:
The procedure must be carried out on both sides.

NOTE:
Make sure that the component is installed to the position noted on removal.

NOTE:
The procedure must be carried out on both sides.

Torque to: 2 Nm

WARNING: This step requires the aid of another technician.

WARNING: This step requires the aid of another technician.

CAUTION: Note the fitted position of the component prior to removal.

CAUTION: Make sure that these components are installed to the noted removal position.

NOTE:
This step requires the aid of another technician.

CAUTION: Note the fitted position of the component prior to removal.

NOTE:
Make sure that the component is installed to the position noted on removal.

CAUTION: Protect the surrounding trim to avoid damage.

NOTE:
Lower and reposition the headliner to aid access.

Torque to: 6 Nm

Installation
1 To install, reverse the removal procedure.