Electronic Brake Control Module: Service and Repair

Anti-Lock Brake System (ABS) Module

Removal

NOTE:
Removal steps in this procedure may contain installation details.
1
NOTE:
The anti-lock braking system (ABS) module mounted to the hydraulic control unit (HCU) cannot be serviced separately. If the ABS module requires replacement, the unit must be replaced as a complete assembly.
Remove the HCU. For additional information, refer to Hydraulic Control Unit (HCU) Service and Repair

Installation
1 Install the HCU. For additional information, refer to Hydraulic Control Unit (HCU) Service and Repair