Parking Brake Control Module: Service and Repair

Parking Brake Module

Removal

NOTE:
Removal steps in this procedure may contain installation details.
1 For additional information, refer to Battery Disconnect and Connect Battery Disconnect and Connect
2 For additional information, refer to Loadspace Trim Panel RH Loadspace Trim Panel RH

4 TORQUE: 8 Nm

6 TORQUE: 4 Nm

Installation
1 To install, reverse the removal procedure.
2
WARNING: Calibrate the electric park brake using Jaguar approved diagnostic equipment. If Jaguar approved diagnostic equipment is not available disconnect the battery for approximately 30 seconds , the vehicle will then prompt the driver to carry out the calibration procedure as per the vehicle hand book on re-connection.
Re-calibrate the electric park brake.