Clearing Trouble Codes

Fig. 36 ABS BAT Fuse Location:

PROCEDURE
The only way to remove the stored faults from the Electronic Control Unit (ECU)'s memory is to remove battery voltage from the ECU.

There are a number of ways to accomplish this. The easiest way is to remove the 2 amp ABS BAT fuse from the fuse panel (fig. 36) for approximately 10 seconds and then reinstalling the fuse. This will clear all stored faults.

NOTE: When working on Jeep ABS brake systems, it is a good practice to check the stored faults prior to disconnecting the battery from the ECU.