Rear Seat Cushion
REAR SEAT CUSHIONREMOVAL
1. Disengage seat cushion at rear by pulling upward on release strap.
Fig. 13:
2. Remove bolts attaching seat cushion to floor pan (Fig. 13).
3. Remove seat cushion from vehicle.
INSTALLATION
1. Position seat cushion in vehicle.
2. Install bolts attaching seat cushion to floor pan. Tighten bolts to 11 N.m (8 ft. lbs.) torque.
3. Lock seat cushion down by pressing firmly on center then outboard edge of cushion until latch engages.