Cluster Lens, Hood, and Mask
CLUSTER LENS, HOOD AND MASKDISASSEMBLY
1. Disconnect and isolate the battery negative cable.
2. Remove the instrument cluster from the instrument panel.
Fig. 6 Instrument Cluster Components:
3. Work around the perimeter of the cluster housing to disengage each of the eight latches that secure the cluster lens, hood and mask unit to the cluster housing.
4. Gently pull the cluster lens, hood and mask unit away from the cluster housing.
ASSEMBLY
1. Position the cluster lens, hood and mask unit over the face of the instrument cluster. Be certain that the odometer/trip odometer switch button is inserted through the proper clearance holes in the mask and the lens.
2. Press firmly and evenly on the cluster lens, hood and mask unit to install it onto the cluster housing.
3. Work around the perimeter of the cluster housing to be certain that each of the eight latches that secure the cluster lens, hood and mask unit to the cluster housing is fully engaged.
4. Reinstall the instrument cluster into the instrument panel.
5. Reconnect the battery negative cable.