Description

DESCRIPTION

DOMESTIC





The antenna body and cable is secured below the fender panel by the antenna cap nut through a mounting hole in the side of the right front fender. The primary coaxial antenna cable is then routed beneath the fender sheet metal and through a entry hole in the right cowl side panel into the interior of the vehicle. Inside the vehicle, the primary coaxial cable is connected to a secondary instrument panel antenna coaxial cable with an in-line connector that is located behind the right kick panel. The instrument panel antenna cable is then routed behind the instrument panel to the back of the radio.

EXPORT





The primary coaxial antenna cable (1) is routed behind the A-pillar trim, up the right side of the roof panel above the headliner. The cable is connected to a secondary instrument panel antenna coaxial cable with an in-line connector that is located behind the A-pillar trim. At the other end, the cable is connected to the antenna module (2). The instrument panel antenna cable is then routed behind the instrument panel to the back of the radio.