B1A09

B1A09-RKE FOB 2 PERFORMANCE

For a complete wiring diagram, refer to the Wiring Information.

- When Monitored:
Continuously.

- Set Condition:
Scrambled messages to the Wireless Ignition Node (WIN) from the transmitter.

NOTE: The most probable cause that sets this code is the RKE transmitter being pressed over 150 times when it is out of range of the Wireless Ignition Node and it loses synchronization with the rolling code of the WIN. To correct, insert the FOBIK in the ignition and turn to the on position to synchronize the rolling code.





TEST FOR INTERMITTENT CONDITION
1. Put the key in the ignition and turn the ignition on.
2. With the scan tool, record and erase DTCs
3. Operate the RKE transmitter in all positions several times.
4. With the scan tool, read DTCs.

Does the scan tool display this DTC as active?

Yes

- Replace and program the RKE transmitter.
- Perform the BODY VERIFICATION TEST. Body Verification Test

No

- The conditions that caused this code to set are not present at this time. Inform the owner of the most probable cause for this code to set and therefore cause the RKE to be inoperative.
- Perform the BODY VERIFICATION TEST. Body Verification Test