B1A77

B1A77- REMOTE START ANTENNA CIRCUIT LOW

For a complete wiring diagram, refer to the Wiring Information.

- When Monitored:
With the ignition on. Remote start present and configured.

- Set Condition:
Short to ground detected on the Remote Start Antenna.





Always perform the Pre-Diagnostic Troubleshooting procedure before proceeding. Wireless Ignition Node (WIN) Verification Test.
DETERMINE ACTIVE OR STORED DIAGNOSTIC TROUBLE CODE (DTC)

Is the DTC active or stored?

WIN - ACTIVE DTC

- Replace the Remote Start Antenna.
- Perform the WIRELESS IGNITION NODE (WIN) VERIFICATION. Wireless Ignition Node (WIN) Verification Test.

WIN - STORED DTC

- The condition that caused this code to set is not present at this time. Check for an intermittent condition by inspecting the related wiring harness for chafed, pierced, pinched, and partially broken wires. Also inspect the related connectors for broken, bent, pushed out, spread, corroded, or contaminated terminals.
- Perform the WIRELESS IGNITION NODE (WIN) VERIFICATION. Wireless Ignition Node (WIN) Verification Test.