Speaker - Removal

REMOVAL






DOOR SPEAKERS





1. Using an approved flat blade tool find the service notch located at the bottom of speaker grille and pry up speaker grille.





2. Remove the four screws attaching the speaker (2) to door panel (3).
3. Disconnect the electrical connector and remove the speaker.

INSTRUMENT PANEL SPEAKER





1. Disconnect and isolate the battery negative cable.
2. Remove instrument panel (2) top cover Instrument Panel Cover - Removal.
3. Remove speaker retaining screws.
4. Remove speaker (1) and disconnect wire harness connector.

REAR SPEAKER - LIFTGATE





1. Disconnect and isolate the battery negative cable.
2. Remove the speaker enclosure fasteners.
3. Remove speaker and disconnect the electrical harness connector.

REAR SUBWOOFER





1. Disconnect and isolate the battery negative cable.
2. Remove the right quarter trim panel. Quarter Trim Panel - Removal.
3. Remove the subwoofer mounting fasteners.
4. Disconnect the electrical harness connector.
5. Remove the speaker.