G. Program the Frequency Operated Button Integrated Key (FOBIK) Transponder

NOTE:
Each Frequency Operated Button Integrated Key (FOBIK) has a unique ID code that is assigned at the time the key is manufactured. When a key is programmed into the WIN, the module learns the transponder ID code and the transponder acquires the unique Secret Key ID code from the WIN.

NOTE:
When the WIN is replaced, a diagnostic scan tool must be used to program the FOBIK's transponders so they will interface with the new WIN receiver. At least two FOBIK transponders must be programmed before the vehicle can be operated.

1. Have the vehicle's PIN readily available before running the routine.

2. Place the ignition key in "RUN" position.

3. Starting at the "Vehicle View" screen, select "WCM/WIN".

4. Select the "Miscellaneous Functions" tab.

5. Select "Program Ignition Keys or Key FOBs".

6. Enter the PIN when prompted.

7. Follow the on screen instructions.

8. For vehicles equipped:

> with premium Tire Pressure Monitoring (TPM) system, continue with Section H. Program Spare Tire Pressure Sensor.

> with only "Auto-Up" front window feature or with "Auto-Up" front window feature and Electronic Stability Program (ESP), continue with Section I. Calibrate Door Module.

> with only Electronic Stability Program (ESP), continue with Section J. Calibrate the Steering Angle Sensor (SAS)

> without premium Tire Pressure Monitoring (TPM) system, "Auto-Up" front window feature or Electronic Stability Program (ESP) clear all Diagnostic Trouble Codes (DTC's), disconnect and remove the wiTECH VCI pod, remove the battery charger and return the vehicle to the customer.