Front Hub and Bearing - Removal
REMOVAL
1. Raise and support the vehicle.
2. Remove the wheel and tire assembly.
3. Remove the half shaft hub/bearing nut.
NOTE: Support the caliper, Do not let the caliper hang by the hose.
4. Remove the disc brake caliper (1) Disc Brake Caliper - Removal.
5. Remove the brake caliper adaptor (1) Disc Brake Caliper Adapter - Removal.
6. Remove and discard the O-ring (2) and then remove the disc brake rotor (1) Brake Rotor - Removal.
7. Remove the wheel speed sensor nut (2).
8. Remove the wheel speed sensor Front.
9. Remove the 3 hub bearing mounting bolts from the back of the steering knuckle. Remove hub bearing (3) from the steering knuckle.