Wheel Alignment - Specification Revision
39E3721984-1987 CHEROKEE/WAGONEER MODELS
AUGUST 1987
STEERING AND FRONT AXLE Attention: Workshop
FRONT WHEEL ALIGNMENT SPECIFICATION REVISION
The camber specification for 1984-1987 Cherokee/Wagoneer models is being changed.
The new camber specifications is 0~ + 1/2~ - 3/4~. The revision is to increase the negative camber specification by 1/4~. Revised specifications are listed below.
Front Wheel Alignment Specifications
ADJUSTMENT SET-TO OK RANGE
TOE:
Right Wheel 0~ 1/32" IN
to 1/32" OUT
Left Wheel 0~ 1/32" IN
to 1/32" OUT
CAMBER 0~ +1/2~ to -3/4~
CASTER 7-1/2" 7~ to 8~
OUTSIDE WHEEL
TURN ANGLE 33~ MAX. 33~ to 32~
2185
*Revised the negative camber specification from 1/2~ to 3/4~
A revised chart is attached. Moisten the back and apply it over the chart on page G-7 of M.R. 244.
FILING INSTRUCTIONS
Record this I.S. Note on Page G-7 of M.R. 244 and file it in the manual.