Fuel Filter: Service and Repair

Fuel Filter:

1. Disconnect battery ground cable.
2. Release fuel system pressure as follows:
a. Remove fuel tank filler cap to release tank pressure.
b. Remove protective cap from pressure test port on fuel rail.
c. Obtain fuel pressure gauge/hose assembly from tool set 5069. Remove gauge from hose.
d. Place gauge end of hose into approved container.
e. Screw other end of hose onto fuel pressure test port.
f. After fuel pressure has been released, remove hose and install cap on test port.
3. Raise and support vehicle.
4. Remove hoses from filter, then filter retaining strap bolt.
5. Remove filter from vehicle.
6. Reverse procedure to install.